|
Please note: All prices now plus VAT
Roving Tools
English type roving tools for clenching copper nails come in two types.
Combination, dinghy dolly, and rove punch.
For single handed operation on small boats, where you can reach to hold the dolly and hit the nail or the rove at the same time. The rove punch has a 3/16" (4.5mm) hole to take up to No 8 gauge nails.
Individual dolly and rove punch set. For working on larger boats where
your arms aren't long enough to tackle both operations, the set consists
of:-
Dolly with a 1/4'' x 1/2 '' (6mm x 13mm) tip to gain access to counter
bored nail heads.
Rove Punch with a 3/16 '' (4.5mm) hole to take up No 8 gauge nails.
Dresser for a neat final finish.
These Roving Tools are sold as a set of 4 or Dinghy Dolly on its own.
Set of 4 Roving Tools £90.00 
Dinghy Dolly on it's own £30.00
Copper Nail Cutters
These are beautifully made from finest steel, proper professional "CUTTERS" not to be confused with end nippers. It is a professional tool for cutting copper nails with an offset for working in awkward and narrow places. Leaves and excellent finish ready for roving. If you are renovating a boat and going to use many roves it will more than justify its initial outlay. This product carries a lifetime warranty from Knipex in Germany.
Copper Nail Cutters £49.50
|
Site designed and Maintained by