Two types here for different usage in 250ml plastic bottles

LIQUID one that is highly concentrated, full biodegradable RUST REMOVER so that 1 x 250 ml plastic bottle will when mixed with water 19 :1with plain water will make 5 litres of finished strength and can be used several times over. Just imerse your rusty tool or fitting and after 2 hours the rust will have been disolved. In very severe cases remove rinse with clean water and put back in for second dip. Unlike phosphoric acid or other based products, RESTORE  is approx pH neutral and will not attack good metal, plastics and non ferrous metals. Its recommended to remove wood handles.

This has been developed to de-rust larger flat surfaces and objects too large to fit into a small reservior as above. Apply the gel with an abraisve pad or sponge and agitate gently for a couple of mins, rinse with clean water and dry thoroughly. Again RESTORE GEL is Ph neutral, bioegradeable and leaves a passivated surface.

Lovely solid brass deck bollard with 3" base, Length of tee 5"

Nice pair of traditional style solid brass cleats with raked horns to adorn any boat. 5" base, 1 3/4" high

In 2 1/2 litre tins. I have managed to source a limited supply of this no longer made product in this liquid form. Its ideal for treating Galvanised Rigging.

These are leather hides, ideal for doing any leather work on your boat and oars. Soak what you need in Lanocote Anhydrous Lanolin and it becomes very supple.

Sizes are approx 44inches x 24 inches and varies up to 5.5mm thick.

I have imported this set of countersinks and plug cutters from USA. In the box there is the following
Drills and Counter sinks for No,s 6,8,10,12,14 Screws
Both 3/8 & 1/2 inch plug cutters are complete with stop collars to control depth
Two hex keys to fit countersink screws. These tools are MADE in USA not imported from China and repacked. Finest American steel is employed.
In the purpose made wooden box they are an ideal present but more importantly a joy to work with.

1 Mini Scraper Plane
1 Mini Block Plane
1 Mini Bullnose Plane.
This set of 3 planes just about covers most work. They are small but well masde with solid brass cases and inlaid with hard wood.

2 X 38MM 1 1/2"
2 X 50MM 2"
1 X 75MM 3"
These are long haried brushes with Stainless steel ferrules and really good value.

These are just the job for varnishing around sash windows, wheel house windows and beadings on boats. They hold a decent amount of varnish and keep a bow wave of product as you brush on. 15mm18mm,21mm & 25mm in the set. Pure white bristle

These are copper riveted and treated with two coats of Linseed Oil. Sizes and prices as follows.

Our diesel is not getting any better. Here is an economic way to treat our tanks especially after a winter
Marine 16 got top awards in PBO Test April 07 with a recommendation.
If contamination is mild (evidenced by the presence of small stringy slime elements) 1 bott (100ml) per 500 litres will usually suffice
If you have severe conditions 100ml to 100 litres
Also a very important result of the test is that it has an additional benefit of improvement in Filterability!!
A very low cost for what is an important check after winter.

Removes bolts and screws from 1/4" up to 7/16".

Accurately drills pilot hole and countersink or counterbore in wood. HSS drills. Made in USA.
3/32" 7/64" 1/8" and 9/64".

With light oak handles and ferrule. With hollow ground back. From 3mm to 42mm

What more can I say, "How can you be without this on a boat today"

Will lift 140 lbs / 64 kg.

This is lump chalk. Ideal for marking wood, concrete, steel etc. Used in boatyards.

500grm tins of pure Lanolin. This is melted in the tin and then painted on your propeller to stop fouling. Its very green, no solvents and is NOT a marine pollutent. Sometimes the old products......... Price £20 a tin plus VAT and carriage. It really does work !!

These two bulkhead lights have been made from Big Ship Walkers Logs. Nicely made to take mains light but can be easily made over to 12/24 volt. A most unusual addition to a main saloon or a study in the house. Made in polished brass.

Its really is a wind up. Never use batteries agin. Fits on the head with adjustments.

I have a few pairs of 8 ft wooden oars second hand but in good condition.

I have a few plastic pots. Its ideal for putting on your propellors as any growth that does come is worked off and the lanolin is still there. Pots at £20 and it works well. |I know as my own boat is so treated.

I have one left. Its around 108 ft x 18 ft. Ideal for scenery work or decoration.