|
Please note: All prices now plus VAT
Consumables Lead Based
White Lead Paste
For use above the waterline so that it does not contaminate paint colour, i.e. showing tramlines through the paint. However with modern paints such as METACLOR C.R. Primers two coats of this and it hides just about anything from my own experience. The mix is usually 60% White lead with 40% putty added to make it go further. When you have a good ball mixed add a thumb nail of motor grease and mix in well. This will slow down the drying of the putty that gives the cracks
one sees in old seams.
3 Kilo tub £35  (25kg POA please email us)
Red Lead Putty
We now make our own Red Lead Putty. Small Putty Mfrs have been taken over by a large organisation who were quoting me prices that were not compatible with the Wooden boat market.
In view of this we researched hard and now have a product once again that is fair in price and quality
2.5 Kilo tin £22.00
5 Kilo tin £28.50
Red Lead Powder
For mixing in with linseed oil putty and stopping seams below the water line. Again a small amount of motor grease added will help.
3 Kilo tin £38
EASY FAIR EPOXY FILLER
Low density, easy sand,spreadable epoxy filler for above and below the waterline
Easy mix 2 parts resin to 1 part hardener.
Working time 30 mins at 20C
Sanding time 2 1/2 hours @ 20C
Colour Blue
This is an easy spreadable filler which in my opinion exceeds others I know of both for working,quality and price. Does not crack or split and is slightly flexible. Used on my own boat and I recommend
200grms paste
100 grms hardener price £10
|
Site designed and Maintained by