|
| Standard Making Iron |
 |
Depending on your geographical location it may be called a Starting Iron or Putting Iron. This iron is used for placing either cotton or oakum in the seam.
|
| £39.50 plus vat |
|
|
| Bent Making Iron |
 |
Standard profile for working around awkward places such as garboard seams.
|
| £39.50 plus vat |
|
|
| King Plank Iron |
 |
For working king planks, joggles, curved seams and hood ends.
|
| £39.50 plus vat |
|
|
| Hardening Iron COTTON |
 |
This has a single crease 1/8" (3mm) with a radius edge for hardening down cotton.
|
| £39.50 plus vat |
|
|
| Hardening Iron OAKUM |
 |
Single crease 3/16'' (4.5cm) with radius edge for hardening down Oakum.
|
| £39.50 plus vat |
|
|
| 5 Irons made in EN8 (Tool Steel) |
 |
After much lobbying by many of you I have now re-introduced 5 irons made in EN8 (Tool Steel).
These irons in EN8 have a bevelled head and a sharper working end on all three making irons. The two hardening irons for Cotton and Oakum remain the same.
|
| Set of 5 in leather wallet £148.00 plus VAT |
|
| Individual Iron £39.50 plus VAT |
|
|
| |
|
Traditional Boat Supplies
31 Ravensmere
Beccles
Suffolk
NR34 9DX
Tel / Fax: 01502 712311
Email: sales@tradboats.com
|
| |
| |
|
Special Offers
|
| |
|
